The Electrical tab in the Simulation Results window shows details about the annual production and consumption of electrical energy by the system.
The Production table lists the total annual energy output of each electrical energyproducing component of the power system, plus the total electrical production.
The Consumption table lists the total amount of electrical energy that went to serve each of the system's electrical loads. The following values appear in this table when applicable.
Variable 
Description 
The amount of energy that went towards serving the AC primary load(s) 

The amount of energy that went towards serving the DC primary load(s) 

The amount of energy that went towards serving the deferrable load 

Electrolyzer Load Served 
The amount of electrical energy consumed by the electrolyzer 
Grid Sales 
The total amount of electricity sold to the grid during the year 
Total Load Served 
The total amount of electrical load served during the year 
Note: The total production can exceed the sum of the total consumption and the excess electricity because of losses in the storage and converter.
The following table defines the values in the first Quantity table.
Variable 
Description 
The total amount of excess electricity that occurred during the year, as well as the excess electricity fraction expressed as a percentage of the total electrical production 

The total amount of unmet load that went unserved because of insufficient generation during the year, as well as the unmet load fraction expressed as a percentage of the total electrical demand 

The total amount of capacity shortage that occurred during the year, as well as the capacity shortage fraction expressed as a percentage of the total electrical demand 
The following table describes the variables in the second Quantity table.
Variable 
Description 
The fraction of the total electrical production that is produced by renewable sources 

Maximum Renewable Penetration 
The maximum value of the renewable penetration that occurs over the year 
See also